Conex Waste Traps Fittings, UK

Conex Waste Traps Product Range

Applications and Uses

Conex Compression fittings are especially advantageous in retrofit plumbing schemes, where space is confined and/or the use of heat must be avoided. They are available in 6-108mm and are suitable for connecting tubes in accordance with EN 1057 and many other standards including ISO 274.

Conex unique ribbed capnuts are supplied in 15-28mm. Sizes 6-12 and 35-54mm are supplied with octagonal capnuts. Fittings in 66.7-108mm incorporate loose compression plates, where tightening is through six 3/8" BSW nuts and allthreads. PTFE tape is not required for the installation process.

Conex Compression fittings are available in duplex brass and/or dezincification resistant (DZR) brass or as dezincification immune gunmetal. Fittings are also available nickel-plated or chrome plated in accordance with EN 248.

Conex Compression fittings are suitable for connecting a wide range of tubes including copper tubes in accordance with EN 1057 and many other standards including ISO 274. Fittings are also compatible with connecting low carbon steel, stainless steel and many types of plastic pipe including crossed linked polyethylene (PE-X) and polybutylene (PB) with size compatible outside diameters.

Hydraulic working temperatures and pressures based on EN 1254-2 are shown below

Hydraulic working temperatures and pressures based on EN 1254-2 are shown below:
For Use With Tube Sizes (mm) Temps Not Exceeding (°C) Max Working Pressure (Bar)
Water Applications 6 - 15 0 - 95 25
16 - 28 16
35 - 54 13
67 - 108 10
LPG, Natural Gas 8 - 28 30 1
Compressed Air 8 - 28 30 7

Maximum Working Temperatures and Pressures

Tube Compatibility Table
Material Tube Specification Size > 6mm to 18mm 22mm 28 to 54mm    
Half Hard and Hard Copper EN1057-R250 (Half Hard) No of Turns 1 ¾    
Liner none none none    
EN1057-R290 (Hard) No of Turns 1 ¾ ½    
Liner None None None    
Soft Copper EN1057-R220 Size > 8mm 10mm 15mm 18mm 22mm
No of Turns 1
Liner: SC1 8 x 1.0 10 x 1.0 15 x 1.0 18 x 1.0 22 x 1.0
Stainless Steel EN10312 Series 1+2 (BS4127) Size > 6mm to 22mm 28mm 35mm to 54mm 67mm to 76.1mm  
No of Turns ¾ ½ ½* *  
Liner None None None *  
Flexible Polybutylene Size > 10mm 15mm 22mm 28mm  
No of Turns  
¤Liner 10 x 1.5/1.8 15 x 1.7/2.0 22 x 2.0//2.3 28 x 2.6/2.9  
Cross Linked Polyethylene(PE-X) Size > 10mm 15mm 22mm 28mm  
No of Turns  
¤Liner 10 x 1.5/1.8 15 x 1.5/1.8 22 x 2.0//2.3 28 x 2.6/2.9  
Medium Density Polyethylene (MDPE) Size > 20mm 25mm 32mm    
No of Turns    
Liner: PY 20 x 2.3/2.6 25 x 2.3/2.6 32 x 3.0/3.4    

PLEASE CONSULT OUR TECHNICAL DEPARTMENT WHEN USING OTHER MATERIALS
* Please refer to our Technical Department.
¤ Liner to be specified by tube manufacturer.

Please click on an item to see the full pricing and complete range available on each product
August 2008-Prices

Photo of Product

W63B

Blank Capnut

From: 35MM
To: 54MM

Photo of Product

W63BPCP

Blank Capnut

From: 35MM
To: 54MM

Photo of Product

W65P

Plastic Ring

From: 35MM
To: 54MM

Photo of Product

W68

Internal Reducer

From: 35X28MM
To: 54X42MM

Photo of Product

W68PCP

Internal Reducer

From: 35X28MM
To: 54X42MM

Photo of Product

99

Rubber Washer

From: 35MM
To: 54MM

Photo of Product

140S

Basin Slotted

From: 1.1/4"
To: 1.1/4"

Photo of Product

140U

Basin Unslotted

From: 1.1/4"
To: 1.1/4"

Photo of Product

151

Combination Bath Waste & Overflow

From: 1.1/2"
To: 1.1/2"

Photo of Product

153

Bath Waste Slotted

From:
To:

Photo of Product

160C

Fixed Inlet Fabricated

From: 22X3/4"
To: 42X1.1/2"

Photo of Product

160CPCP

Fixed Inlet Fabricated

From: 22X3/4"
To: 42X1.1/2"

Photo of Product

160M

Male Fixed Inlet Fabricated

From: 3/4X160MM
To: 3/4X160MM

Photo of Product

160MPCP

Male Fixed Inlet Fabricated

From:
To:

Photo of Product

160RCPCP

Resealing Fixed Inlet

From: 35MM
To: 35MM

Photo of Product

160RM

Male Resealing Fixed Inlet

From: 1.1/4"
To: 1.1/4"

Photo of Product

P211

Deep Seal P

From: 1.1/4"
To: 2"

Photo of Product

S211

Deep Seal S

From: 1.1/4"
To: 2"

Photo of Product

P217

Bath P Low Height

From: 1.1/4"
To: 1.1/2"

Photo of Product

P217PCP

Bath P Low Height

From: 1.1/4"
To: 1.1/2"

Photo of Product

P219

Deep Seal P With Adjustable Inlet

From: 1.1/4"
To: 1.1/2"

Photo of Product

P219PCP

Deep Seal P With Adjustable Inlet

From: 1.1/4"
To: 1.1/2"

Photo of Product

P220

Resealing P Antivac Type

From: 1.1/4"
To: 1.1/2"

Photo of Product

S220PCP

Resealing S Antivac Type

From: 2"
To: 2"

Photo of Product

W301

Straight Coupler

From: 35X35MM
To: 54X54MM

Photo of Product

W301PCP

Straight Coupler

From: 35X35MM
To: 54X54MM

Photo of Product

W302

Male Straight Coupler

From: 35X1.1/4"
To: 54X2"

Photo of Product

W302PCP

Male Straight Coupler

From: 35X1.1/4"
To: 54X2"

Photo of Product

W303

Female Straight Coupler

From: 35X1.1/4"
To: 54X2"

Photo of Product

W303PCP

Female Straight Coupler

From: 35X1.1/4"
To: 42X1.1/2"

Photo of Product

W333

Inlet Extension Tail Pipe

From:
To:

Photo of Product

W401FT

Elbow With Cleaning Eye

From: 35MM
To: 54MM

Photo of Product

W401FTPCP

Elbow With Cleaning Eye

From: 35MM
To: 54MM

Photo of Product

W401/OF

Obtuse Elbow

From: 35MM
To: 54MM

Photo of Product

W412

Extended Bath Overflow

From: 1.1/4"
To: 1.1/4"

Photo of Product

W432

Bent Tail Pipe Extended

From:
To:

Photo of Product

W432PCP

Bent Tail Pipe Extended

From:
To:

Photo of Product

16030

Chrome Plated Brass Adjustable Inlet

From: 1.1/4X35MM
To: 1.1/2X42MM

Photo of Product

18016

Inlet Joint Washer

From: 1.1/2"
To: 1.1/2"

back to top

Conex Waste Traps Fittings, UK